EnglishEnglish
 |
| Center line diameter of kiln bottom (m): | |
|---|---|
| Kiln net width: | |
| Kiln shed column spacing: | |
| Ring kiln road minimum outer diameter : | |
| Center line length of kiln body : | |
| Stacking layers/kiln chamber height : | |
| Daily output: | |
| Quantity: | |
Circular clay brick tunnel rotary kiln plant coal dryer kiln for ceramics brick drying firing process in South Africa
Liyuan. Bricebt
The rotary tunnel kiln is a key thermal worker equipment for sintering brick technology. It belongs to the brick brunt, and the kiln body is a sintering brick equipment on the ring -shaped orbit. It is mainly composed of equipment foundation, kiln body, thermal worker system, tide discharge system, blank system, power supply and control system, ring flue.
Rotary tunnel kiln parameter table | |||||
Specifications | YDY100/8 | YDY125/8 | YDY150/8 | YDY125/12 | YDY150/12 |
Center line diameter of kiln bottom (m) | 100 | 125 | 150 | 125 | 150 |
Kiln net width (m) | 8 | 8 | 8 | 12 | 12 |
Gauge (m) | 8.8 | 8.8 | 8.8 | 12.8 | 12.8 |
Kiln shed column spacing (m) | 15 | 15 | 15 | 19 | 19 |
Ring kiln road minimum outer diameter (m) | 125 | 150 | 175 | 154 | 179 |
Center line length of kiln body (m) | 150/168 | 150/168 | 150/168 | 150/168 | 150/168 |
Stacking layers/kiln chamber height (m) | 14/1.9 | 14/1.9 | 114/1.9 | 14/1.9 | 14/1.9 |
Daily output/10,000 pcs (standard) | 20 | 20-23 | 20-25 | 30-33 | 30-35 |
Total fan power (KW) | ≤119 | ≤170 | ≤170 | ≤208 | ≤288 |
Thermal parameter measurement and control | Digital display, manual control/single board computer inspection, manual control/automatic control optional | ||||
Environmental protection desulfurization device | Recommended, user optional | ||||
Technical requirements | The moisture content of the wet billet is not more than 16%, the molding pressure is not less than 3.5Mpa, the raw material drying sensitivity coefficient is less than 1, and the total internal combustion heat consumption is less than 300 kcal/kg | ||||
Process characteristics | 1. Low production cost: low heat consumption, electricity province, small workers, kiln -free cars and ferry cars, and comprehensive production costs. 2. Simple production process: one -time burning, multi -level drying, real -time temperature monitoring, simple operating process, high yield rate, and easy management. 3. Green Environmental Protection: Fully respond to national environmental protection requirements and provide professional environmental protection supporting design. 4. The construction cycle is short: the kiln construction cycle is only 90 days. 5. Short investment recovery period: small investment, large production capacity, low production cost, and short investment recovery period. 6. Low maintenance cost of maintenance: high standards, targeted materials, professional and exquisite factory design, high -required construction technology and accuracy, ensure that the equipment has no major repair for ten years | ||||
