Home / Products / Kiln / Rotation Rotary Movable Clay Brick Tunnel Kiln

Product Category

Rotation Rotary Movable Clay Brick Tunnel Kiln

Share to:

Rotation Rotary Movable Clay Brick Tunnel Kiln

Auto Coal Burner Clay Brick Kiln Machine Brick Oven for Firing Clay Bricks in Nepal Custormised is a key thermal worker equipment for sintering brick technology. It belongs to the brick brunt, and the kiln body is a sintering brick equipment on the ring -shaped orbit. It is mainly composed of equipment foundation, kiln body, thermal worker system, tide discharge system, blank system, power supply and control system, ring flue.

Center line diameter of kiln bottom (m):	125m
Kiln net width:	12m
Kiln shed column spacing:	19m
Ring kiln road minimum outer diameter :	154m
Center line length of kiln body :	150/168
Stacking layers/kiln chamber height :	14/1.9
Daily output:	300,000~330,000 pcs
Availability:

Quantity:



Inquire Add to Basket

Model:
Rotation Rotary Movable Clay Brick Tunnel Kiln
Brand:
Liyuan. Bricebt

Rotation Rotary Movable Clay Brick Tunnel Kiln

Introduction to Rotary tunnel kiln

The rotary tunnel kiln is a key thermal worker equipment for sintering brick technology. It belongs to the brick brunt, and the kiln body is a sintering brick equipment on the ring -shaped orbit. It is mainly composed of equipment foundation, kiln body, thermal worker system, tide discharge system, blank system, power supply and control system, ring flue.

Rotary tunnel kiln parameter table
Specifications	YDY100/8	YDY125/8	YDY150/8	YDY125/12	YDY150/12
Center line diameter of kiln bottom (m)	100	125	150	125	150
Kiln net width (m)	8	8	8	12	12
Gauge (m)	8.8	8.8	8.8	12.8	12.8
Kiln shed column spacing (m)	15	15	15	19	19
Ring kiln road minimum outer diameter (m)	125	150	175	154	179
Center line length of kiln body (m)	150/168	150/168	150/168	150/168	150/168
Stacking layers/kiln chamber height (m)	14/1.9	14/1.9	114/1.9	14/1.9	14/1.9
Daily output/10,000 pcs (standard)	20	20-23	20-25	30-33	30-35
Total fan power (KW)	≤119	≤170	≤170	≤208	≤288
Thermal parameter measurement and control	Digital display, manual control/single board computer inspection, manual control/automatic control optional
Environmental protection desulfurization device	Recommended, user optional
Technical requirements	The moisture content of the wet billet is not more than 16%, the molding pressure is not less than 3.5Mpa, the raw material drying sensitivity coefficient is less than 1, and the total internal combustion heat consumption is less than 300 kcal/kg
Process characteristics	1. Low production cost: low heat consumption, electricity province, small workers, kiln -free cars and ferry cars, and comprehensive production costs. 2. Simple production process: one -time burning, multi -level drying, real -time temperature monitoring, simple operating process, high yield rate, and easy management. 3. Green Environmental Protection: Fully respond to national environmental protection requirements and provide professional environmental protection supporting design. 4. The construction cycle is short: the kiln construction cycle is only 90 days. 5. Short investment recovery period: small investment, large production capacity, low production cost, and short investment recovery period. 6. Low maintenance cost of maintenance: high standards, targeted materials, professional and exquisite factory design, high -required construction technology and accuracy, ensure that the equipment has no major repair for ten years